Table of Contents
Advertisement
Hookups with Cable Box/Satellite (cont'd) 9
With this connection:
You may watch one channel while recording another.
You may not record scrambled channels.
1
VCR
ANT
AUDIO
IN
L
OUT
IN
R
VIDEO
OUT
OUT
IN
Cable TV or
Satellite
Signal
Connections
1
Connect a Cable TV or Satellite signal to the VCR's
ANT(enna) IN Jack.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack
on the VCR to the IN Jack on the Cable Box/Satellite.
3
Use a second RF coaxial cable to connect the OUT Jack on
the Cable Box/Satellite to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/Satellite on the same channel as
the VCR's RF output channel. The default is channel 3.
See page seven.
Set the TV to the Cable Box/Satellite output channel (03 or
04).
Then, with the VCR in VCR position (the green
VCR/TV light will appear on the display panel), use
CH
to select the channel you want to record
at the VCR. Start the recording.
2
Press VCR/TV once to put the VCR in TV position.
(The VCR/TV light will disappear.)
3
Select the channel you want to watch at the Cable
Box/Satellite.
2
Cable Box/Satellite
IN
RF coaxial
cable
O U T
RF coaxial
cable
• When you play a tape, set the
Cable Box/Satellite to the same
channel as the RF output channel
of the VCR. (See page seven.) Set
the TV to the Cable Box/Satellite
output channel (03 or 04).
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack
Helpful Hint
Advertisement
Table of Contents
