Timer Recording - Philips MVR440MG Owner's Manual

26 Timer Recording

Your VCR can record TV programs while you're away.You can pro-
gram up to eight timer recordings. For each one, the VCR will turn
itself on, record, and turn itself off. Make sure:
Channels are set.
The clock is set.
There is a tape in the VCR. Make sure the tape's record tab is
intact and the tape is long enough to record the program(s).
The VCR is in VCR position.The VCR/TV light will appear. If it
does not, press VCR/TV once.
1
Press MENU until MENU appears. Press PLAY or
STOP to select TIMER PROGRAMMING. Press
F.FWD. Available program numbers will flash.
TIMER PROGRAMMING
PROG. 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
2
Press PLAY or STOP repeatedly to select a program
number. Press F.FWD. (If you select a program number
that already has a timer recording stored, information about
that program will appear. Press PLAY or STOP to select
another program number.)
PROGRAM NUMBER
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
3
Press PLAY or STOP repeatedly to select a ONCE,
DAILY, or WEEKLY recording.When the arrow is
beside your choice, press F.FWD.
ONCE - The VCR will record a TV program on any day
you choose, up to 12 months away.
DAILY - The VCR will record a TV program at the same
time on the same channel every day, Monday through Friday.
WEEKLY - The VCR will record a TV program at the same
time on the same channel every week, for example, every
Monday.
PROGRAM NUMBER
B ONCE
DAILY
WEEKLY
1
1
POWER VCR/TV EJECT
PLAY
REW F.FWD
1
STOP
STATUS
1 2 3
4 5 6
7 8 9
0
SPEED SEARCH MODE STILL/PAUSE
REC MEMORY SLOW
Helpful Hint
• Only programs that air Monday-
Friday can be recorded on a
DAILY basis. If you select DAILY
at step 3, then enter a Saturday
or Sunday DATE at step 4, the
correct program will not record.
The VCR will alter the recording
date and record a different pro-
gram than you intended.
1-3
CH