Remote Control - Philips MVR440MG Owner's Manual

18 Remote Control

Select the signal your TV receives from the VCR.
Watch a tape, watch a program while recording it, or watch TV
using CH or the Number buttons to change channels at
the VCR.The VCR/TV light appears when in VCR position.
Watch TV (changing channels at the TV) or watch one program
Press to play a tape. Also, press to release Slow, Search, or Still
mode and return to normal play. See page 34. Use to select an
item in the menu or enter information in the menu.
Press repeatedly to access menus or to remove menus.
Enter channel numbers as a two-digit number for the quickest
results. For example, to select channel 6, press 0,6. If you only
press the Number 6 button, channel 6 will appear after a brief
delay. (There also may be a brief delay when you select channels
10, 11, and 12.) To select channels 100 and above, enter channel
numbers as a three-digit number. For example, to select channel
Press to start a recording or a timed One-Touch Recording.
Press to memorize a tape position. See page 35.
Press to scan through the VCR's available channels.
Press to eject the tape.
VCR/TV Button
while recording another. See page 31.
POWER Button
Press to turn the VCR on or off.
Number Buttons
Press to select channels at the VCR .
117, press 1, 1, 7.
MEMORY Button
Press for slow motion play. See page 34.
CH
Press to adjust tracking. See page 38.
EJECT Button
VCR Position
TV Position
PLAY Button
MENU Button
REC Button
See pages 24-25.
SLOW Button
Button
See pages 12-13.
POWER VCR/TV EJECT
PLAY
REW
F.FWD
STOP
STATUS
1 2 3
CH
4 5 6
7 8 9
0
SPEED SEARCH MODE STILL/PAUSE
REC MEMORY SLOW