Valor 700MN Homeowner's Manual page 14

Cleaning your fireplace
WARNING
Risk of severe burns! The glass window
is very hot during operation. Ensure the
fi replace and glass have cooled off before
touching them.
Cleaning glass mineral deposits
A by-product of the combustion process in a gas
fi replace is a mineral which can appear as a white fi lm
on the ceramic glass window of your appliance.
The composition of the deposit varies depending on
location and time, and can appear intermittently.
There is no defi nitive solution to this issue. Various
cleaning products have been tried with varying
results. The following are recommendations only and
cannot guarantee results.
Note: Mineral deposits occur naturally and are not
covered under the Valor
• Clean the glass regularly to avoid a buildup of fi lm
from mineral. If the fi lm is left for a long period of
time, it can etch the glass, making it much harder, if
not impossible, to remove.
• Never use an abrasive cleaner or ammonia-based
cleaner on the ceramic glass. Any abrasion of the
surface can compromise the strength of the glass.
An emulsion-type cleaner is recommended.
• Use a soft damp cloth to apply the cleaner. Dry the
glass with a soft, dry, preferably cotton cloth. Most
paper towels and synthetic materials are abrasive
to ceramic glass and should be avoided. Follow all
instructions on the bottle/container.
• Our dealers have experienced good results from the
products listed below. We cannot, however, guaran-
tee results of these products.
» Brasso, Polish Plus by KelKem, Cook Top Clean
Creme by Elco, White Off by Rutland, Turtle Wax
14
warranty.
®
Do not clean the glass while it is hot
• Always securely replace the window and the barrier
screen before lighting (see next page).
• If broken, glass panes may only be replaced as a
complete window unit as supplied by the manufac-
turer.
• If the barrier screen becomes damaged, it must only
be replaced with the same model and version barrier
from Valor.
Cleaning other parts
• Clean the steel trims with mild soap and warm water.
Any alcohol/solvent-based cleaner may weaken and
damage the coating.
• Clean the barrier screens by dusting with a soft
brush.
• Clean the fi rebox ceramic logs/rocks and walls by
dusting them with a soft brush. Dust can also be
removed from the burner using a soft brush after
removing the ceramic logs. When cleaning, make
sure that no particles are brushed into the slots of
the burner.
Caution
Choking Hazard! Make sure the fireplace area
is clear of firebed small particles to avoid
ingestion by small children. Vacuum thoroughly
around the fireplace area after cleaning.
Log position
Log position is important in your Valor fi replace
because it can optimize the beauty of the fl ame and
the combustion effi ciency of your fi replace.
If logs are moved during glass cleaning or other
fi replace maintenance, refer to your fi replace Instal-
lation Manual for specifi c instructions on how to
position them for optimal operation. If you are not
comfortable performing this maintenance, please
contact your dealer.