Cleaning, Maintenance And Storage; Safety And Performance - Withings Body Smart WBS13 Product Manual

6

Cleaning, Maintenance and Storage

EN-US
Cleaning and maintenance the Withings Body Smart
- It is recommended to clean the glass plate of the scale before
each measurement.
- Use only a cloth dampened with warm water to clean your scale.
The use of any detergents or cleaners may cause irreversible
damage to the conductive coating on top of the glass plate.
- Do not use the device while doing cleaning and maintenance
operations.
Storage
- Store the device in a clean and safe location between use.
- If storage conditions are different from the operating
conditions indicated in the technical specifications,
wait 30 minutes before taking a measurement.

Safety and performance

RF Statement
Medical electrical equipment needs special precautions regarding
EMC and needs to be installed and put into service according to
the EMC information provided in the accompanying documents.
Portable and mobile RF communications equipment can affect
medical electrical equipment.
Guidance and manufacturer's declaration-electromagnetic emissions
Withings Body Smart is intended for use in the electromagnetic environment
specified below.
The customer or the user of the Withings Body Smart should ensure that it is used
in such an environment.
Emissions Test Compliance
CE emissions CISPR11 Group 1
RE emissions CISPR11 Class B
Harmonic emissions N/A
IEC 61000-3-2
Voltage fluctuations/Flicker N/A
emissions IEC 61000-3-3
Electromagnetic environment – guidance
Withings Body Smart uses RF energy only
for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
Withings Body Smart is suitable for use
in all establishments, including domestic
establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.