Cleaning, Maintenance And Storage; Safety And Performance - Withings WBS13 Product Manual

Cleaning, Maintenance and Storage

Cleaning and maintenance the Withings Body Smart
- It is recommended to clean the glass plate electrodes of the
scale before each measurement.
- Use only a cloth dampened with warm water to clean your
scale. The use of any detergents or cleaners may cause irreversi-
ble damage to the conductive coating on top of the glass plate.
- Do not use the device while doing cleaning and maintenance
operations.
Storage
- Store the device in a clean and safe location between uses.
- If storage conditions are different from the operating conditions
indicated in the technical specifications, wait 30 minutes before.

Safety and performance

RF Statement
Electrical equipment needs special precautions regarding EMC
and needs to be installed and put into service according to the
EMC information provided in the accompanying documents.
Portable and mobile RF communications equipment can affect
the device.
Guidance and manufacturer's declaration-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should ensure that it is used in such an environment.
Emissions Test Compliance
CE emissions CISPR11 Group 1
RE emissions CISPR11 Class B
Harmonic emissions Not
IEC 61000-3-2 applicable
Voltage fluctuations/Flicker Not
emissions applicable
IEC 61000-3-3
Electromagnetic environment – guidance
The device uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
The device is suitable for use in all establish-
ments, including domestic establishments
and those directly connected to the public
low-voltage power supply network that sup-
plies buildings used for domestic purposes.
7
EN-US
EN
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK