Table of Contents
Advertisement
Notes:
1. For the latest CPU/Memory updates, please refer to our website at
www.supermicro.com/products/serverboard/
2. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. Jumpers not indicated are for test purposes only.
4. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The serverboard you've
received may or may not look exactly the same as the graphics shown in this
manual.
Jumper
JBR1
JBT1
2
2
JI
C1/JI
C2
JPG1
JPL1/JPL2
JPME2
JPS1 (X10DRFF-C Only)
JWD1
LED
LED1 Power Switch LED
LED2 UID LED
LEDM1 BMC Heartbeat LED
LEDS1 SAS Heartbeat LED (For X10DRFF-C)
X10DRFF-C Serverboard Jumpers
Description
BIOS Recovery
Clear CMOS
SMB to PCI-E Slots
VGA Enabled
Gigabit LAN Port1/Port2 Enable
Manufacture Mode (ME) Select
SAS Enabled
Watch Dog
X10DRFF-C Serverboard LED Indicators
Chapter 5: Advanced Serverboard Setup
for details.
State
On: Power On
Blue: Unit Identifi ed
Green (Blinking): BMC Normal
Green (Blinking): SAS Normal
5-13
http://
Default Setting
Pins 1-2 (Normal)
See Chapter 2
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Advertisement
Table of Contents
