Handlebar Position; Adjusting The Handlebar Position - Husqvarna FC 450 2023 Owner's Manual

10 TUNING THE CHASSIS
10.16
10.17
48

Handlebar position

A01168-10

Adjusting the handlebar position

Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
Info
Turn clockwise to increase the damping; turn
counterclockwise to reduce damping when the shock
absorber rebounds.
The holes on the handlebar support
A
of from the center.
Hole distance A 3.5 mm (0.138 in)
The handlebar can be mounted in 2 different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
Info
In addition, the handlebar can be mounted rigidly or on a
rubber bearing.
Preparatory work
–
Take off the handlebar cushion.
1
are placed at a distance