Atlas Copco XAHS 146 Dd S3A APP Instruction Manual page 35

Notes
1. More frequently when operating in a
dusty environment.
2. Replace the element when the pressure
drop exceeds 0.8 bar (11.6 psi).
3. Every 1500 hours. Refer to the Deutz
operation manual.
4. 500 hours is only valid when using
PAROIL 15W40.
5. In case of poor fuel quality, replace fuel
filter more frequently.
6. Clean retainer when replacing element.
The following part numbers can be
7.
ordered from Atlas Copco to check
on inhibitors and freezing point:
 2913 0028 00 refractometer
 2913 0029 00 pH meter.
Keep the bolts of the housing, the lifting
beam, tow bar and axles securely
tightened. For torque values see section
Technical specifications.
Maintenance schedule
Wheels
Tyre pressure
Check wheel bolts for firm seating
Check hub caps for firm seating
Check tyres for uneven wear
Check lateral play of bearings
Check brake lining wear
Towbar
Check coupling head for wear, operation and fastening
Check brake play
Check height adjustment facility
Check reversing lever for ease of motion
Check safety cable and bowden cable for damage
Check/ adjust brake system (if installed)
Lubrication
Coupling head and all its moving parts/shaft
Overrun brake
Reversing lever
Overrun coupling
Joints of height adjustable towbar
Bearings (conventional bearings only)
- 35 -
Initially Interval
Before each run
Before first run
2,500km/annually
2,500km/annually
After 500 km 2,500km/annually
5,000km/annually
Before first run 5,000km/annually
After first run 2,500km/annually
Before each run, 5,000km/annually
during first 500 km
2,500 km 5,000km/annually
5,000km/annually
Before first run 2,500km/annually
Before first run 2,500km/annually
Before first run 5,000km/annually
Before first run 5,000km/annually
Before first run 5,000km/annually
5,000km/annually
5,000km/annually