3M DBI Sala 3400800C Instruction Manual page 9

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
DESCRIPTION:
Figure 2 identifies key components of the DBI-SALA Sealed-Blok Self-Retracting Devices (SRDs). Sealed-Blok SRDs are drum
wound Wire Rope Lifelines (A) which retract into a sealed aluminum Housing (B). They can hang from anchorage by a Carabiner
attached through the Swivel Eye (C) on the top of the SRD. A Self-Locking Snap Hook (D) on the end of the Lifeline attaches to
the designated Fall Arrest connection on a Full Body Harness. A Bumper (E), protects the Wire Rope and Ferrules securing the
Snap Hook from abrasion and corrosion.
Figure 1 defines the Sealed-Blok SRD models covered by this instruction manual. The following SRD Types are available:
• Self-Retracting Lanyard (Figure 2A): Self-Retracting Lanyards (SRLs) are suitable for applications where the lifeline
remains generally vertical during use and possible Free Fall is limited to 2 ft (0.6 m).
• Self-Retracting Lanyard with Rescue (Figure 2B): Self-Retracting Lanyards with Rescue include an integral means for
assisted rescue by raising or lowering the rescue subject. RSRLs are equipped with a 3-Way Emergency Retrieval Hand
Crank (F). Some models include a Tripod Mounting Bracket (G) to mount the SRL on the leg of a Tripod for Confined Space
applications.
Lifeline Lifeline Description
3401391 9 m (30 ft) of 4.76 mm (3/16 in) galvanized wire rope, self-locking alloy steel swiveling snap hook with indicator.
3401392 9 m (30 ft) of 4.76 mm (3/16 in) stainless wire rope, self-locking alloy steel swiveling snap hook with indicator.
3401393 9 m (30 ft) of 4.76 mm (3/16 in) stainless wire rope, self-locking stainless steel swiveling snap hook with indicator.
3401397 4.5 m (15 ft) of 4.76 mm (3/16 in) stainless wire rope, self locking alloy steel swiveling snap hook with indicator.
3401398 4.5 m (15 ft) of 4.76 mm (3/16 in) stainless wire rope, self locking alloy steel swiveling snap hook with indicator.
3401399 4.5 m (15 ft) of 4.76 mm (3/16 in) stainless wire rope, self locking stainless steel swiveling snap hook with indicator.
3401453 9 m (30 ft) of 4.76 mm (3/16 in) galvanized wire rope, self-locking alloy steel swiveling snap hook with indicator.
3401454 9 m (30 ft) of 4.76 mm (3/16 in) galvanized wire rope, self-locking alloy steel swiveling snap hook with indicator.
3401556 9 m (30 ft) of 4.76 mm (3/16 in) galvanized wire rope, self-locking alloy steel swiveling snap hook with indicator.
Hook Description
2000180 Swiveling Self-Locking Snap Hook with Impact Indicator
2000181 Swiveling Self-Locking Snap Hook with Impact Indicator
Casing:
Wire Rope Lifeline Tensile Strength:
Maximum Arrest Force:
Average Arrest Force:
Maximum Arrest Distance:
Average Locking Speed:
Minimum Fall Clearance:
Table 1 - Specifications
Material
Alloy Steel
Stainless Steel
Sealed Aluminum Casing
Galvanized Steel - Min. Tensile Strength 18.7 kN (4,200 lbs)
Stainless Steel - Min. Tensile Strength 16.0 kN (3,600 lbs)
6 kN (1350 lbs)
4 kN (900 lbs)
1.1 m (42 in)
1.4 m/s (4.5 ft/s)
1.8 m (6 ft) at 140 kg (310 lbs)
9
Gate Strength Throat Size
16 kN (3,600 lbs) 1.9 m (3/4 in)
16 kN (3,600 lbs) 1.9 m (3/4 in)
Hook
2000180
2000180
2000181
2000180
2000180
2000181
2000181
2000181
2000180