Advertisement
PE8600 Series (12-WD, WD, NB-12-WD & NB-WD)
Concealed Vertical Rod Exit Devices
Installation Instructions
Equipment Needed
Tools
Strike Packs
Strike Pack for
WD-PE8600
*Note: The NB-WD-PE8600, 12-NB-WD-PE8600 do not have a bottom strike.
Before installation:
1. Fit and hang door.
2. Check the box's label for the size of the exit device.
The surface of the door where the exit device is to be applied must be flush. Clear away
any raised projections to allow exit device to rest on the flat surface of the door. If shim
kit is required, contact your distributor.
Note: Please refer to trim and other installation instructions provided in the box.
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
Support Block (Provided)
Rail Cutting Guide (Provided)
Strike Pack for 12-WD-PE8600
650 Top Strike Pack NB-WD-PE8600
& 12-NB-WD-PE8600
3
A8315-1 5/23
Advertisement
