Assa Abloy Sargent PE80 Series Installation Instructions

End cap mounting plate, exit devices

Hide thumbs Also See for Sargent PE80 Series:

Installation Instructions

End Cap Mounting Plate

PE80 Series Exit Devices

Mounting plate

Slide mounting plate into rail, until the mounting plate is firmly against the rail.

WARNING

This product can expose you to

lead which is known to the state of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to www.

P65warnings.ca.gov.

1-800-727-5477 • www.sargentlock.com

permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

#10-24 Round head

Cover screws

#8-32 Oval head

WARNING

Attention Installer: Improper

installation may result in damage

to the product and void the factory

warranty.

A8317-1 05/23

End cap

Table of Contents

Do you have a question about the Sargent PE80 Series and is the answer not in the manual?

Page 1 Installation Instructions End Cap Mounting Plate PE80 Series Exit Devices Mounting screws Rail #10-24 Round head Cover screws #8-32 Oval head Mounting plate End cap Slide mounting plate into rail, until the mounting plate is firmly against the rail. WARNING WARNING This product can expose you to Attention Installer: Improper...
Page 2 Inner Inner Mounting Mounting Holes Holes Wire Clearance For new installation, use the inner mounting holes. Ensure mounting rail bracket is against (For retrofit, use whichever holes are in-line with the rail without a gap. the holes in the door.) Mounting plate base should rest flat on door or New installation shown shims, without any overlap of the mounting plate...