Valor 1700KP Homeowner's Manual page 15

Cleaning your fireplace
To refi t the window:
1. Place the window in its bottom railing. Ensure to
remove any vermiculite or glass particles in the
railing before installing the window.
Bottom railing
2. Push the top of the window frame against the
fi rebox.
3. While you hold it, pull the side levers back into the
window brackets on each side.
4. Apply fi rm hand pressure around the window
frame to ensure the window is sealed tight against
the fi rebox. Pull out the top of the window and
release it to ensure the springs return it.
The window units must be correctly
installed, fastened and sealed after
servicing. If not it could result in serious
bodily injury and/or damage to the
fi replace.
Window frame
To ensure safe operation:
• Double-check that the bottom of each
window frame is correctly installed in
the bottom support railing;
• Verify that the retainer hooks are
properly fastened to the top brackets;
• Pull out the top of each side window and
release it to ensure the springs return it;
• Ensure the window is sealed before
operation.
Failure to install the window correctly
can:
• Cause carbon monoxide to leak.
• Affect the performance of the fireplace.
• Damage components.
• Cause overheating resulting in
dangerous conditions.
Damage caused by incorrect window
installation is not covered by the Valor
Warranty.
WARNING
WARNING
15