Network Management Service; Name Field (Pgn 60159); Address Claiming - Baumer EAM580R-SY Manual

6 Network Management Service

6.1

NAME Field (PGN 60159)

The name field will be sent by the device on every start up as a broadcast message. The name field is used to identify the
device in the network, as well as for the address claiming. The name field can't be configured by the user.
Description Identifier
PGN60159
EAMxxx 18EEFFACh
6.2

Address Claiming

Every device on the J1939 network needs to observe name field messages on the bus in order to detect, if another device
tries to use the same address as the own device.
When it is detected, that another device using the same address, the own name field is also broadcasted on the bus. The
device with the lower priority (higher Identifier) needs to increment its own address by one and broadcast the name-field
on the bus again. Save and restore commands
Baumer_EAM580_360_EB360_SAE_J1939_MA_EN_Rev0003.0000h_Index0004.docx
05.12.2022
DLC 21 Bit 11 Bit 3 Bit
8
8 A7E7 157h 0h
7h
13/27
Bits of Protocol Data Unit (PDU)
5 Bit 8 Bit 1 Bit 7 Bit
0h 8Eh 0h
4 Bit 3 Bit 1 Bit
0h 0h 5h 1h
Baumer Electric AG
Frauenfeld, Switzerland