Disassembling Transaxle - Kubota ZD221-48 Workshop Manual

ZD221. WSM
TRANSAXLE
[3] DISASSEMBLING TRANSAXLE
Removing Engine Frame
(1)
1. Remove the screen base (1) and engine frame (2).
(When reassembling)
(2)
Engine frame mounting
48 to 55 N'm
nghtening torque 4.9 to 5.7 kgf·m
screw
36 to 411bHt
(1) Screen Base
(2) Engine Frame
W1020929
3GZAAAlKP014A
Removing Hydraulic Pipes from Transmission Case
1. Loosen the nuts of hydraulic pipes.
2. Disconnect and remove the hydraulic pipes from transmission
case.
3. Remove the rear axle case (RH and LH) (5), (6).
4. Remove the front center cover (7).
(When reassembling)
nghtening torque
40 to 44 N'm
Hydraulic pipe nut 4.0 to 4.5 kgf·m
29 to 321bHt
(1) HST Pipe (RH) (5) Rear Axle Case (RH)
(2) HST Pipe (LH) (6) Rear Axle Case (LH)
(3) PTO Pipe (7) Front Center Cover
1 ) (4) HST Charge Pipe
W1021081
3GZAAADKP041 A
3GZAAADKP042A
3GZAAADKP043A
2-S16