Kubota ZD221-48 Workshop Manual page 38

ZD221 , WSM
(Continued)
G GENERAL
• Test 6 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever (4) to "DISENGAGE" (OFF) position.
4. Grasp the motion control levers (2) and move then inward from
"NEUTRAL LOCK" position to "NEUTRAL" position and then
release the levers.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off .
• Test 7 (OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever (4) to "ENGAGE" (ON) position.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off.
(1) Parking Brake Lock Pedal
(2) Motion Control Lever
G-24
(3) Key Switch
(4) PTO Lever
W1050412