Kubota ZD221-48 Workshop Manual page 102

ZD221 , WSM
ENGINE
3TAAAAB1P047A
3TAAAAB1 P0488
Gear Case
1. Remove the screw (1 ).
2. Disconnect the start spring (2) in the speed control plate
mounting hole.
3. Remove the gear case (3).
(When reassembling)
• Apply a liquid gasket (Three Bond 1215 or equivalent) to both
sides of the gear case gasket (4).
• Be sure to set three O-rings (5) inside the gear case.
(1) Screw (4) Gear Case Gasket
(2) Start Spring (5) O-rings
(3) Gear Case
W10174840
1-530