English
Using click-on attachments
Removing or attaching click-on attachments
5 Move the shaving heads over your skin in
circular movements to catch all hairs growing
in different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Do not press too hard, this can cause skin
irritation.
Note: Rinse the shaving unit regularly to ensure
that it continues to glide smoothly over your
skin.
6 Dry your face.
7 Switch off the shaver and clean it after each
use.
Note: Make sure that you rinse all foam or shaving
gel off the shaver.
It is recommended not to use the click-on
cleansing brush attachment directly after shaving
to prevent skin irritation.
1 Make sure the shaver is switched off.
2 Pull the attachment straight off the shaver.
Note:Do not twist the attachment while you pull
it off the shaver.
3 Insert the lug of the attachment into the slot
in the top of the shaver. Then press down the
attachment to attach it to the shaver('click').
Attachment holder
Note: Attach the click-on cleansing brush
attachment on the attachment holder first, before
you place the attachment onto the appliance.
43