Cleaning The Beard Styler Attachment - Philips SP9860/14 Manual

English

Cleaning the beard styler attachment

2
1
Clean the beard styler attachment after each use.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment . Do not pull at the
sides of the comb.
2 Rinse cut hairs off the cutting unit with
lukewarm water.
3 Rinse cut hairs off the comb.
4 Remove the cutting unit from the beard styler
attachment. By pushing the cutting unit off
the beard styler attachment, you can remove
any hairs that have accumulated inside the
beard styler attachment. You can also rinse the
bottom of the cutting unit.
5 Rinse cut hairs out of the beard styler
attachment.
6 Carefully shake off excess water and leave the
comb, cutting unit and beard styler attachment
to air-dry before you use them again.
7 When the cutting unit is dry, attach it to the
beard styler attachment.
53