Required Connections - Icom CY-5300 Instruction Manual

Required Connections

■
[DC POWER INPUT TERMINAL]
[TX(TX•RX) ANT]
TX•RX antenna required
for installing an internal
duplexer.
NOTE: Must have minimum 20' vertical separation when using separate antennas.
5
INSTALLATION AND CONNECTIONS
Make sure the back up battery is correctly
connected. Use a cable with following
current capacity. Solder or clamp the cable
plug when connecting the power cable to the
backup battery to prevent voltage drops.
Power cable current capacity: 25 A or more
[RX ANT] GROUND
2