Advertisement
Quick Links
A
1437
Connecting loop
C
D
F
Wydanie 01/10.05.2019
EN 795:2012 TYPE
CEN/TS 16415:2013/B
Working webbing
width 35 mm
maximum length of device 30 m
000 0493
Model
RL [m]
AE 321 10
AE 321 20
B
AE 321 30
Working webbing length
adjuster (tensioner)
E
G
ADJUSTABLE HORIZONTAL
LIFELINE
10 m
AE 321
20 m
30 m
Nr Kat. AE 321 xx
Connecting webbing 0,35 m
1 kN ± 20%
Marking, identity label
Connecting webbing
width 35 mm
Connecting
loop
1/4
Advertisement
Related Manuals for Protekt AE 321 Series
Summary of Contents for Protekt AE 321 Series
- Page 1 ADJUSTABLE HORIZONTAL Model RL [m] LIFELINE AE 321 10 10 m AE 321 AE 321 20 20 m 1437 EN 795:2012 TYPE AE 321 30 30 m Nr Kat. AE 321 xx CEN/TS 16415:2013/B Working webbing Marking, identity label width 35 mm Connecting webbing width 35 mm Working webbing length...
- Page 2 Structural anchor point Structural anchor point 1 person - min. 16,50 kN 1 person - min. 16,50 kN 2 persons - min. 22,00 kN 2 persons - min. 22,00 kN 3 persons - min. 22,00 kN 3 persons - min. 22,00 kN Structural anchor point Structural anchor point 1 person - min.
- Page 3 Instruction manual Horizontal lifelineAE 321 is a component of fall protection equipment. It should be used for works requiring frequent mobility in the horizontal. Horizontal lifeline AE 321 complies with EN 795 Type B (portable anchor points for fall protection equipment). Horizontal lifeline AE 321 provides protection for one, two or three persons. CONSTRUCTION Work rope length adjuster (tensioner) is made of galvanized steel [B].
- Page 4 Tel. + 48 42 6802083, Fax +48 42 6802093 CENTRAL INSTITUTE FOR LABOUR PROTECTION info@protekt.com.pl www.protekt.com.pl ul. Czerniakowska 16, 00-701 Warsaw, Poland, no. 1437 Declaration of Conformity EU for this product is delivered with the product. If needed it is also available at the manufacturer's website: www.protekt.com.pl.
Need help?
Do you have a question about the AE 321 Series and is the answer not in the manual?
Questions and answers