Protekt TROLLEY ST012 Quick Start Manual

! When using the equipment, check it regularly for dangerous phenomena and damages
affecting the operation of the equipment and the safety of the user, in particular: looping and sliding of ropes on sharp edges,
pendulum fall, conductivity, any damage such as cuts, abrasion, corrosion, exposure to extreme temperatures, negative
exposure to climatic factors, exposure to chemicals.
! Personal protective equipment must be transported in packaging that protects it from damage or getting wet, e.g. in bags
made of impregnated fabric or in steel or plastic cases or crates.
! PPE shall be cleaned with tools and methods which do not compromise the materials of the equipment. ! For textile fibre materials (lanyards, belts, straps,
and ropes), use gentle detergents intended for textiles.
Cleaning can be done by hand or by machine washing. It should be rinsed thoroughly.
Fall arrest energy absorbers shall only be cleaned with a cloth damp with water. The energy absorber must not be immersed in
water. Plastic parts shall be cleaned with water only. Equipment that has become wet from cleaning or use should be
thoroughly dried in normal conditions, kept away from any heat sources. Metal parts and mechanisms (springs, hinges, latches, etc.) can be
periodically lightly lubricated to improve their performance.
! Individual PPE should be stored loosely packed in well-ventilated dry areas,
protected against light, UV radiation, dust, sharp objects, extreme temperatures and corrosive
substances.
! All PPE components shall conform to their instructions for use and
the prevailing standards: EN 353-1, EN 353-2, EN 354, EN 355, EN 360 - for fall arrest systems; EN 362 - for connectors; EN341,
EN1496, EN1497, EN1498, - for emergency rescue/recovery devices; EN 361- for full body harnesses; EN 813 - for waist belts; EN 358 -
for work positioning systems ; EN 795 - for anchor point devices.
Manufacturer:
PROTEKT - Starorudzka 9 - 93-403 Łódź - Poland
tel.: +4842 6802083 - fax: +4842 6802093 - www.protekt.com.pl
Notified body of the EU type testing certificate issuer per Regulation (UE) 2016/425:
PRS - No. 1463, Polski Rejestr Statków S.A. al. gen. Józefa Hallera 126 80-416 Gdańsk, Poland
Production control notified body:
Apave Exploitation France SAS (n°0082) 6 Rue du Général Audran 92412 COURBEVOIE cedex France
The Declaration of Conformity is available on www.protekt.pl.
IDENTITY CARD
It is responsibility of the user organisation to provide the Identity Card and to fill in the required details. Identity Card should be filled in before first use of the
equipment by a competent person responsible in an organisation for personal fall protection equipment. Information regarding periodic inspections, repairs
and reasons for withdrawal of the equipment from use are filled in by a competent person responsible in an organisation for personal fall protection
equipment. Identity Card should be stored in a safe place throughout the whole period of use of the equipment. It is forbidden to use personal fall protection
equipment if the Identity Card is not filled in.
DEVICE MODEL AND TYPE
SERIAL NUMBER
REFERENCE NUMBER
DATE OF MANUFACTURE
PERIODIC AND MAINTENANCE INSPECTIONS
REASONS FOR NOTICED DAMAGES,
DATE OF
COMPLETED REPAIRS
INSPECTION/REPAIR
INSPECTION
DATE OF PURCHASE
DATE OF FIRST USE
USER NAME
FULL NAME AND
DATE OF NEXT
SIGNATURE OF
INSPECTION
RESPONSIBLE PERSON
A
EN 795:2012 / B
B
1
4
2
3
EN
TROLLEY ST012
Ref. AT 112
C
a TROLLEY
b ST 012
c
Ref. AT 112
d
DATE OF PRODUCTION SERIAL NUMBER:
e
MM/RRRR XXXXXXXX
f
g
h EN 795:2012/B
2x
CEN/TS 16415:2013
i
j
2020
Next inspection
k