Operation - Bartscher Contessa 1002 Manual

5.2 Operation

Prior to first use
CAUTION!
Never fill hot water into the cold water tank.
Do not fill water into the hot device; wait until it has cooled down.
•
Prior to first use it is necessary to run 2 or 3 cycles of water through the machine
without coffee, in order to properly rinse the device („Preparation of coffee"
steps 1-8).
•
Due to the nature of the system a small amount of water always remains in the container
for water. It is necessary to take this into account when refilling the container.
•
Always fill the water container with an
amount of water equal to the capacity
of the thermo pump jug included with
the coffee machine. The amount of
coffee brewed will be the same as the
amount of water poured.
•
If too much water is poured into the
water container, excess water will
drain out through the flow hose.
•
The thermo jug and filter basket should be thoroughly washed in warm water and a
mild cleaning agent, then rinsed in clean water. Dry thoroughly after washing.
•
The device's casing should be wiped with a moist cloth and dried with a soft towel.
•
Connect the device to an appropriate power source which serves one piece of
equipment.
•
The coffee machine is now ready for use.
- 30 -
Flow hose