Table of Contents
Advertisement
•
The supply cable must be disconnected from the socket only by
pulling the plug.
•
Never carry or lift the device by the supply cable.
•
In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.
•
Never immerse the device, the power cord and the power plug in
water or other liquids.
•
Do not use any acid agents and make sure no water ingresses
the device.
•
Never operate the device with moist hands or standing on wet floor.
•
Remove the plug from its socket:
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
•
After turning on the uppear heating plates with the ON/OFF switch
for upper heating plate they become very hot. To avoid burns do not
touch these surfaces.
•
Furthermore, after turning off the uppear heating plates, they remain
hot for some time afterwards. Prior to cleaning, shifting or moving the
device to another place, leave the device to cool down.
- 22 -
Advertisement
Table of Contents
