Description Of Connectors; Led Indicators - Televes 563802 Quick Installation Manual

Description of connectors

Front view
563802
1.- ASI input
2.- ASI output
3.- Power connectors
4.- Ethernet connector
5.- Ethernet connector
6.- Programmer connector
7.- RF loop through input
8.- RF output

LED indicators

TEMP
EAS
Front
LED alarms
CH1/CH2 – CH3/CH4
QAM
LOOP
1
2
3
4
5
6
7
8
563821
(EAS)
Color Internal temp
Solid green Normal
Slow blink orange High
Fast blink red Very High
Color EAS status
Solid green ON
Off OFF
Color Channel status
Off Disabled / EAS
Solid green Lock
Solid red Unlock
Blinking red Boot
Solid yellow Partial lock
Color Output mode
Solid green Normal
Slow blinking green Carrier wave, null or muted
Color Output loop status
Solid green ON
Off OFF
Rear view
1
2
5
6
7
8
9
563802
1.- CVBS input (Video/Closed Caption). Channel 1
2.- Analog (L/R) audio input. Channel 1
3.- CVBS input (Video/Closed Caption). Channel 2
4.- Analog (L/R) audio input. Channel 2
5.- EAS CVBS input (563821 only)
6.- EAS L/R analog audio input (563821 only)
7.- EAS control (563821 only)
8.- CVBS input (Video/Closed Caption). Channel 3
9.- Analog (L/R) audio input. Channel 3
10.- CVBS input (Video/Closed Caption). Channel 4
11.- Analog (L/R) audio input. Channel 4
Comment
Safe
Warning
Danger
Comment
An alarm has been triggered and the system is broadcasting common EAS audio and video.
No alarm present. Each encoder in the system is broadcasting its own content.
Comment
Channels disabled or unit in EAS mode.
Inputs locked and unit encoding audio/video.
Inputs unlocked and unit not encoding audio/video.
Unit starting up.
Only one of the two inputs is locked and encoding audio/video.
Comment
Output RF channel is ON, broadcasting audio/video (normal mode).
Output RF channel is OFF or in an alternate signal mode.
Comment
Output loop-through enabled. Units may be daisy-chained using the internal combiner.
Output loop-through disabled. Units must be combined using an external combiner.
3
4
10
11
563821
(EAS)