Description Of Connectors; Led Indicators - Televes T.OX 563801 Quick Installation Manual

Table of Contents

Advertisement

Description of connectors

Front view
563801
1.- ASI input
2.- ASI output
3.- Power connectors
4.- Ethernet connector
5.- Ethernet connector
6.- Programmer connector
7.- RF loop through input
8.- RF output

LED indicators

Solid green
TEMP
Slow blink orange
Fast blink red
EAS
Solid green
Off
Off
Front LED alarms
CH1 – CH2
Solid green
Solid red
Blinking red
QAM
Solid green
Slow blinking green
LOOP
Solid green
Off
Back LED indicators
A/V inputs
Indicate the currently selected audio and video inputs and where the input signals should be connected.
1
2
3
4
5
6
7
8
563811
(EAS)
Color
Internal temp
Normal
High
Very High
Color
EAS status
ON
OFF
Color
Channel status
Disabled / EAS
Lock
Unlock
Boot
Color
Output mode
Normal
Carrier wave, null, or muted
Color
Output loop status
ON
OFF
Rear view
10
11
563801
1.- YPbPr component input. Channel 1
2.- Closed Caption (CC) input. Channel 1
3.- Analog (L/R) audio input. Channel 1
4.- EAS CVBS input (563811 only)
5.- EAS L/R analog audio input (563811 only)
6.- SPDIF digital optical audio input. Channel 1
7.- SPDIF digital coaxial audio input. Channel 1
8.- SPDIF digital coaxial audio input. Channel 2
9.- SPDIF digital optical audio input. Channel 2
10.- EAS control (563811 only)
11.- YPbPr component input. Channel 2
12.- Closed Caption (CC) input. Channel 2
13.- Analog (L/R) audio input. Channel 2
Comment
Safe
Warning
Danger
Comment
An alarm has been triggered and the system is broadcasting common EAS audio and video.
No alarm present. Each encoder in the system is broadcasting its own content.
Comment
Channel disabled or unit in EAS mode.
Input locked and unit encoding audio/video.
Input unlocked and unit not encoding audio/video.
Unit starting up.
Comment
Output RF channel is ON, broadcasting audio/video (normal mode).
Output RF channel is OFF or in an alternate signal mode.
Comment
Output loop-through enabled. Units may be daisy-chained using the internal combiner.
Output loop-through disabled. Units must be combined using an external combiner.
2
1
3
4
6
5
7
8
9
12
13
563811
(EAS)

Advertisement

Table of Contents
loading

This manual is also suitable for:

T.ox563811

Table of Contents