Transmission Disassembly - Buell P3 2003 Service Manual

HOME

TRANSMISSION DISASSEMBLY

CASE REMOVAL
NOTES
If transmission only is being serviced, do not remove fly-
wheel assembly.
For crankcase, flywheel or other major servicing, the fly-
wheel assembly can be removed at any time. The same
specialty tools are used.
7693
Figure 6-28. Transmission Assembly
1. See Figure 6-28. Remove transmission case. See
TRANSMISSION CASE
2. Remove crankcase and transmission assembly from
engine stand.
6-20 2003 Buell P3: Drive/Transmission
7737
1. Arbor press
2. Transmission remover (Part no. B-43985-1)
3. Crankcase
4. Transmission assembly
5. Parallel supports
Figure 6-29. Transmission Remover/Installer on Fixture
3. See Figure 6-29.
sion assembly (4) on arbor press (1) and support trans-
mission assembly on parallel supports (5).
4. Press transmission assembly using TRANSMISSION
REMOVER (2) (Part No. B-43985-1) to remove transmis-
sion assembly from crankcase half.
6.6
5. Remove crankcase from fixture.
1
2
4
5
Place crankcase half (3) and transmis-
6.7
3