Table of Contents
Advertisement
Click "Refresh" button to refresh the UPnP status. If the UPnP status were still "Invalid UPnP" after refreshing it for many
times, the port number may be wrong. Please change the mapping type to "Manual" and then click
to modify the
port until the UPnP status turns to "Valid UPnP". Refer to the following picture. You can view the external IP address of
the NVR. Input the external IP address plus port in the address bar to access the NVR such as http://183.17.254.19:81.
4.5 DDNS Settings
The DDNS is used to control the dynamic IP address through domain name. Speco Technologies provides free DDNS
service with US-based servers. You can access the NVR easily if the DDNS is enabled and configured. Click Start→Settings
→Network→DDNS to go to the interface as shown below. The default DDNS type will be "specoddns.net". The default
domain name will be shown, you can use this for your domain name or input your own. If invalid or taken, please select
another domain name. Click on test to check if ok. If so, you may now go to [your domain name].specoddns.net with
Internet Explorer and access your recorder remotely.
4.6 EZ Camera Setup
7
Advertisement
Table of Contents
