Appearance Care; Exterior Care - Chevrolet Groove 2023 Owner's Manual

Chevrolet Groove Owner Manual (GMNA-Localizing-MidEast-17286929) -
2023 - CRC - 6/28/22
156 Vehicle Care
Type-II
The front towing hook of some models has
a hole cover on the right side of the
bumper, and the fixing hole for installing
the towing hook can be seen by opening
the hole cover. Place the towing hook in the
tool bag of the luggage compartment. Take
out the towing hook and install it into the
fixing hole. Rotate the towing hook
clockwise to tighten it completely and insert
a socket wrench into the hook hole to assist
tightening. Be sure that the towing hook is
installed firmly before towing the vehicle.
When towing the vehicle, the driver must
control steering and braking in the vehicle.
After towing, remove the rope and tow
hook, close the hole cover, and put the tow
hook back into the tool box.
The vehicle may be damaged when it is
towed by ropes. To reduce damage.
The towing hook must be used when
other traction devices are not available.
The vehicle shall be towed from the
front only.
Keep the traction rope out of contact
with the bumper.
Make sure that both ends of the traction
rope are firmly secured on the
towing hook.
Pull the traction rope for inspection.
Drive the vehicle at a low speed and
avoid sharp turning.
The vehicle may be out of control when it is
towed by ropes. To reduce damage.
The towing distance shall not be too long,
and the vehicle should be towed at a low
speed.
Do not tow the vehicle if the wheel,
transmission, axle, steering or brake is
damaged.
Do not remove the key from the ignition.
Otherwise, the steering will be locked so
that the vehicle cannot turn.
The towing speed shall not exceed 30 km/h,
and the towing distance shall not
exceed 40 km.
When long-distance towing is required, it is
suggested to see your dealer or a
professional towing service company
for help.

Appearance Care

Exterior Care

Vehicle Washing
The best way to maintain the finish paint of
vehicles is to wash it regularly and keep it
clean.
Park the vehicle in the place where is not
directly exposed to sunlight.
Wash the vehicle with the specified
neutral soap liquid and cold or warm
water.
Be sure to remove the soap liquid and
cleaning agent from the surface by the
means of flushing.
General Motors vehicles are designed to
operate under normal environmental
conditions and natural factors.