Cruise Control - Chevrolet Groove 2023 Owner's Manual

Chevrolet Groove Owner Manual (GMNA-Localizing-MidEast-17286929) -
2023 - CRC - 6/28/22
124 Driving and Operating
under the normal condition. When faults
(such as neglected installation, loosened
connector, abnormal CAN
communication) exist on the ESC system,
only the ESC OFF lamp will go out
three seconds later, and other three
lamps are normally on.
2. In the process of driving the vehicle,
if the ESC function is activated, the ESC
lamp will flash, telling the user that the
ESC system is working. If the ESC system
functions abnormally but the ABS+EBD
system functions normally, the ESC lamp
is normally on, indicating that the ESC
system has fault. If the ESC system and
the ABS function abnormally and the
EBD system functions normally, the ESC
lamp and the ABS lamp are normally on.
If the ESC system, the ABS and the EBD
system function abnormally, the ESC
lamp, the ABS lamp and the EBD lamp
are normally on.
3. The ESC OFF lamp is used to indicate
that the ESC function is disabled (the
lamp will be normally on as long as the
ESC function is disabled; the lamp will go
out if the function is enabled). If you
press the ESC OFF switch, some ESC
functions will be disabled, and the ESC
OFF lamp illuminates. When the switch is
pressed, the ESC system is working, and
the ESC function will not be disabled
immediately and will be disabled after
the work is over. If you press the ESC
switch again, all functions will be
enabled again. If the ESC switch is
pressed for more than 10 seconds, the
ESC system will consider it one incorrect
operation, and the ESC function will not
be disabled.
4. The ESC system will be activated
automatically after every ignition cycle.
ESC OFF Switch
Press the ESC OFF switch, and the ESC OFF
lamp on the instrument cluster illuminates
and some ESC functions are disabled. Press
the ESC switch again, the ESC function is
enabled again and the ESC OFF lamp on the
instrument cluster goes out.
Normally, it is not recommended to disable
the ESC system. The system should be
disabled temporarily only when the vehicle
is in deep mud, sand, ice, or snow.

Cruise Control

Cruise Control System
The cruise control buttons are on the
steering wheel. When the cruise control
system is started, the vehicle can run at the
set speed. Press the brake pedal, and the
function will be immediately disabled.