Liftgate - Chevrolet Groove 2023 Owner's Manual

Chevrolet Groove Owner Manual (GMNA-Localizing-MidEast-17286929) -
2023 - CRC - 6/28/22
2. Reach your hand to the lower side of the
engine hood front edge, as shown above,
and lift the engine hood release handle
up. Lift up and fully open the
engine hood.
3. Separate the engine hood prop rod from
the fixing clamp. Lift the prop rod up
and firmly insert the free end into the
slot on the engine hood.
Closing Engine Hood
1. Support the engine hood to prevent it
from closing, and take the prop rod out
from the slot. Then, fix the rod in the
fixing clamp.
2. Make sure hands and other body parts
are away from the closed area of the
engine hood.
3. Slowly lower the hood, and release it
when the hood front edge is about
30 cm from the closed position.
Keys, Doors, and Windows
4. Be sure to lock the engine hood in place
and check for confirmation.
Caution
The following precautions must be
observed:
Before driving, pull the front edge of
the engine hood to make sure the
engine hood is securely locked.
Do not pull the engine hood release
handle when the vehicle is in motion.
Do not drive the vehicle with the hood
open. An open hood will obstruct
driver vision.
Driving with an open hood could lead to
collisions that will damage your vehicle
and other property and cause casualties.

Liftgate

Open the Liftgate
Unlock the liftgate with keyless entry (if
equipped): For vehicles equipped with
Passive Entry Passive Start (PEPS) system,
press the liftgate release switch.
11