Network Settings - D-Link DAP-1755 User Manual

Section 3 - Configuration
This page lets you configure the network settings for the DAP-1755. To access this page, click the Settings drop-down menu at the
top of the page, then select Network. Click Save at any time to save the changes you have made on this page.
Management Link
The Advanced Settings section of the Network Settings page allows you to
configure both IPv4 and IPv6 settings that will be used by the DAP-1755's
extended network.
My Internet Connection
is
IP Address
Subnet Mask
Gateway Address
Primary DNS Server
Secondary DNS Server
D-Link DAP-1755 User Manual

Network Settings

You can change the URL name of the device by editing the text
in the text box. If you change the name of the device, you will
need to enter "http://xxxx.local. " (where "xxxx" corresponds to
the name of the device) in the address bar of your web browser
in order to access the configuration utility.
Advanced Settings
IPv4
Here you can select whether you want the IP to have a
Dynamic IP or Static IP address. If you select Dynamic IP, the
options below will not be available.
Enter the Static IP address that you want to assign to the
extended network AP. This address should be outside of the
uplink router's DHCP address pool.
Enter the subnet mask.
Enter the gateway address. This is usually the IP address of
the uplink router.
Enter the address of the primary DNS server.
Enter the address of the secondary DNS server. This is optional
but will provide backup if the primary server fails.
32