Section 1 - Product Overview
1
Reset Button
2
Power Switch
3
LAN
D-Link DAP-1755 User Manual
1
Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1755
appears. Release the button and the extender will go through its reboot process
settings.
Use the power switch to power the DAP-1755 when it will not be in use for an extended period of time.
The factory default is ON.
Connect an Ethernet cable if you are adding wireless to a wired network.
Bottom
2
3
until a red light
to restore to factory default
7