INTROdUCTION The DAP-1720 extends the wireless coverage of an existing wireless router or access point (AP) via wireless or Ethernet port. Please refer to the User Manual, available at http://dlink.com for instructions on how to use your DAP-1720 as a wired extender.
PROdUCT SETUP SetUP SELECT YOUR METHOd You may set up the DAP-1720 using WI-FI Protected Setup (WPS) (recommended), the QRS Mobile App, or a web browser. SETTING UP THE dAP-1720 USING WI-FI PROTECTEd SETUP (WPS) NOTE: Your source router or AP must feature a WPS button to use WPS.
The default Wi-Fi network name (SSID) and password are printed on the DAP-1720's Wi-Fi Configuration Card. 2. HOW dO I CONNECT A PC OR OTHER dEVICE TO THE dAP-1720 IF I HAVE FORGOTTEN MY WI-FI NETWORK NAME (SSId) OR WI-FI PASSWORd? - If you haven't changed the extended Wi-Fi network's settings, you can use the network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.
SUPPORt You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: d-Link Middle East - dubai, U.A.E. Tel: 1300-700-100 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au P.O.Box 18224, Dubai, U.A.E.
Page 6
This purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. dAP-1720...