Table of Contents
Advertisement
EN
File menu table:
Function
File name
Storage
device
Time
interval
4G interval
Function menu descriptions:
Menu item
Edit
Start
Upload
Return
Steps to save data files
1 Insert a MicroSD card or USB memory.
2 Press
3 Select USB flash drive or SD Card.
4 Set the time interval.
Time interval options: 5 s, 30 s, 1 min, 10 min, 30 min, 60 min.
5 Press the
Copyright Qingdao Hantek Electronics Co., LTD
Settings
Descriptions
The file name is automatically generated when the USB
- -
When inserting a USB flash drive or SD card, select the
U disk
corresponding storage device. The SD card storage
SD card
10 s
30 s
1 min
Set the interval for saving temperature data to a USB
10 min
30 min
60 min
10 s
30 s
1 min
Set the interval for uploading temperature data to the
10 min
30 min
60 min
Table 5.4 File menu table
Descriptions
Edit the parameters of selected items.
Start saving data, and automatically enter the < List > page.
Hold down the soft button for 3 seconds to enable the 4G network
transmission function. After the network transmission function is
enabled, all other buttons are disabled except the power button
and the alarm button
seconds to disable the network transmission function.
Exit the < File > page and return to the < System > page.
Table 5.5 Function menu descriptions
to enter the < File > page.
start
button, the instrument will start recording data, and the < List > page
Function introduction
flash drive or SD card is inserted.
function is optional.
flash drive or SD card.
network.
. Hold down the Return soft button for 3
HTM200 user manual
27
Advertisement
Table of Contents
