Panasonic KX-NS300 Getting Started page 45

Note
By assigning the PBX's IP address to one IP-PT, it is possible to assign the PBX's IP address to other
IP-PTs or IP-CSs on the same LAN through system programming. For details, refer to "9.14 PBX
Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property—Option—
the PC Programming Manual.
KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT511 and
KX-NT551)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address
Select "Default Gateway".
To enter the IP address of the PBX
Return to the
Menu screen.
ENTER
Continued on next page
Press "SETUP" when it is displayed.
ENTER Select "Disable"
for DHCP setting.
1
ENTER
Subnet Mask Address*
ENTER
Default Gateway Address*
ENTER
For KX-NT300 series: Software version 2.00 or later only
For KX-NT500 series: Software version 1.00 or later only
Select "PBX". ENTER
PBX IP Address
4.3.1 Assigning IP Addressing Information
SETUP
Select "IP Address".
2
Select "PBX IP ENTER
Address".
ENTER
Announce Mode" in
ENTER
ENTER
3
ENTER
Select "Primary
PBX".
Getting Started 45