Select The Receive Mode That Suits Your Needs; Set The Receive Mode - Canon imageCLASS MF8180C Starter Manual

Setting the Machine for Receiving Faxes

Select the Receive Mode that Suits Your Needs

Follow the chart below to determine the right receive mode for your needs.
Do you intend to connect a third-party
external telephone to the machine?
Yes
Do you intend to use an answering
machine with the machine?
No
Do you intend to receive faxes
automatically?
Yes
Do you subscribe to a network switch
service?
Yes
NOTE
The <NET SW.> mode is available for certain countries only and requires subscription to a network switch service. Contact
your telephone company for availability. Refer to Chapter 5, "Receiving Faxes," in the Facsimile Guide.
23
No <FaxOnly>
Answers all calls as faxes and
disconnects voice calls.
Yes
<AnsMode>
Receives faxes automatically
and records voice messages.
No
<MANUAL>
Does not answer any call. You
have to manually receive faxes.
No
<FAX/TEL>
Switches between fax and voice
calls automatically.
<NET SWITCH>
Distinguishes between fax and
voice calls.

Set the Receive Mode

1 2
Press [Menu]. Press [ ] or [ ] to
select <4.FAX
SETTINGS>, then press
[OK].
4 5
Press [ ] or [ ] to Press [Stop/Reset] to
select the receive mode, return to standby mode.
then press [OK].
NOTE
NOTE For details on setting the
receive mode. See Chapter 5,
For <AnsMode>, make sure
"Receiving Faxes," in the
an answering machine is
Facsimile Guide.
connected to the machine.
3
Press [ ] or [ ] to
select <1.RECEIVE
MODE>, then press
[OK].
24