Canon imageCLASS MF8180C Starter Manual page 5

Connect Power Cord and Select Language and Country
1
230V
Connect the power cord into the rear socket and
the wall outlet (230V) to turn on the machine.
NOTE
• This machine has no power switch.
∗
• <SUPPLY REC. PAPER CASSETTE:A4>, <INSERT
After installing the drum cartridge, toner cartridges and loading paper, the standby display appears.
∗
Indicates either "C", "M", "Y", or "K".
7
2
If the message <DISPLAY LANGUAGE>
appears, use [ ] or [ ] to select the language
for the LCD, then press [OK].
CARTRIDGE>, <INSERT DRUM> is displayed:
3
If the message <COUNTRY SELECT> appears,
use [ ] or [ ] to select the country, then press
[OK].
4
The machine enters the standby mode.
WARNING
This product emits low level magnetic flux. If you use a
cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.
NOTE
– During electrical storms, disconnect the power cord
from the power outlet. (Please note that received
documents stored in the machine's memory may be
lost when you unplug the machine.)
– Whenever you unplug the machine, wait at least five
seconds before you plug it in again.
– Do not plug the machine into an uninterruptible power
supply (UPS).
8