Table of Contents
Advertisement
10.4.1 Assigning the list of presets (1-30)
• Set the station that you would like to save to a presets
memory slot.
• If the station is playing, press and hold
approx. 3 seconds until the Presets list opens up.
• Navigate to the preferred memory slot and confirm your
selection by pressing [NAVIGATE/ENTER](9).
• The selection will be confirmed by the display showing
"Program (1-30, depending on the memory slot) saved".
10.4.2 Calling up a station from the presets list
(1-30)
• Press
[ ]
to call up the Presets list.
• Use [NAVIGATE/ENTER] (9) to navigate to the
preferred station and confirm your selection by pressing
[NAVIGATE/ENTER].
10.5 Audio setting
For some stations with a weak signal, quality can be
slightly improved by playing them in mono quality. You
can enable this function in the menu, and the radio will
automatically switch to mono reception when signal
quality is poor. To change the audio setting, proceed as
follows:
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER] (9) to navigate to the "Audio
setting" menu item.
• Confirm the selection by pressing [NAVIGATE/ENTER]
and choose your preferred setting.
11. Bluetooth
®
• When Bluetooth
mode is enabled for the first time, the
®
radio is immediately in "Pairing mode" and visible to
other devices. You can therefore pair the radio with your
smartphone, for example, and begin transmitting from
the relevant source device.
• If the radio has already been paired to a smartphone, the
next time Bluetooth
mode is enabled, the connection is
®
automatically established.
• To pair a new radio, press the [NAVIGATE/ENTER]
button (9) or call up the Bluetooth
[SETTNG] button (4) and select "Pair new device".
To learn how to operate the radio during Bluetooth
playback, consult the Control Panel.
[ ]
(2) for
menu via the
®
®
16
12. AUX IN
• AUX IN mode allows a cabled connection to be
established between another audio source and this
device. The volume can be controlled via this radio. All
other operations are carried out via the connected audio
source.
13. Sleep
The radio has a timer function, which switches the radio
to standby mode after a pre-defined length of time,
regardless of its operating mode.
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER] (9) to navigate to the "Main
menu" menu item.
• Confirm the selection by pressing [NAVIGATE/ENTER].
• Use [NAVIGATE/ENTER] to navigate to the menu item
"Routines" -> "Snooze".
• You can set the timer value with [NAVIGATE/ENTER].
• Confirm the setting by pressing [NAVIGATE/ENTER].
• If the sleep timer is activated, this is indicated in the
playback screen by [ ].
14. Alarm clock
The radio has two individually adjustable alarm times.
14.1 Settings
You can access the alarm settings as follows:
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER] (9) to navigate to the "Main
menu" menu item.
• Confirm the selection by pressing [NAVIGATE/ENTER].
• Use [NAVIGATE/ENTER] to navigate to the menu item
"Routine" -> "Alarm clock".
Alarm 1 and alarm 2 are configured identically and allow
two separate alarm times to be saved. Choose Alarm 1
or 2 and confirm your selection by pressing [NAVIGATE/
ENTER].
Set the following details using [NAVIGATE/ENTER].
Advertisement
Table of Contents
