Arm; Count - HP E1343A User Manual

:COUNt

Parameters
Comments
Example
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The subsystem selects the number of scanning cycles (1 through 32767) for

ARM

each command.
INITiate
ARM
number
:COUNt < > MIN|MAX
:COUNt? [MIN |MAX]
ARM:COUNt < number > MIN|MAX
of times (1 to 32767) with one
INITiate:CONTinuous OFF|0
Parameter Name
number
< >
•
Number of Scans: Use only values between 1 to 32767 for the number of
scanning cycles (default is 1).
•
Related Commands:
•
*RST Condition: ARM:COUNt 1
Setting Ten Scanning Cycles
ARM:COUN 10
SCAN (@100:115)
IINIT
allows scanning cycles to occur a multiple
INITiate command and when
is set.
Parameter Type
numeric
ABORt, INITiate[:IMMediate]
Sets 10 scanning cycles.
Sets channel list.
Starts scanning cycle.
Relay Multiplexer Command Reference
ARM
Range of Values
1–32767|MIN|MAX
51