Settings Before First Use; Standby Mode - Philips VoIP841 User Manual

3.3.2 Verify the battery level
The battery icon displays the current battery
level:
100% full
60% full
30% full
Empty. Require charging.
Your handset may power down shortly if it is not
charged after the battery is empty.
Note
If you are on the phone while the battery is nearly
empty, you will hear warning tones. Your call
maybe cut off shortly after the warning.

3.4 Settings before first use

At first start up, you will be asked to set the
language, accept an agreement, select the country
where the phone is to be used and set the area
code.
3.4.1 Set the language
This setting determines the display language for
the menus and messages.
Scroll to the language you want.
1
Select
Press to confirm.
2
Note
If you need to re-set the language, see "Set the
display language", page 27.
3.4.2 Review the agreement
Read the agreement carefully. It is necessary you
understand and accept the terms and conditions
of the agreement before using the phone.
Press (Up or Down) to scroll through
1
the agreement.
Accept
Press to accept the agreement and
2
proceed.
! Warning
If you do not accept the agreement, you will not
be able to use the phone.
Getting started
3.4.3 Select your country
It is necessary to select the correct country
where the phone is to be used. This makes sure
that the phone will work properly according to
your country's standards.
Scroll to your country name.
1
Select
Press to confirm.
2
• When a country is selected, the phone will
reset and update the international calling code
of the selected country (example, 33 for
France). It will power up automatically after a
few seconds.
Note
The phone is best configured for the available
countries in the list. If you don't see your country
name in the list you can enter your country's
international calling code by selecting "OTHERS"
at the bottom of the list. Please refer to the
country codes list on page 35 to see your
country's international calling code.
If you need to re-select the country, see "Set
your country code", page 31.
3.4.4 Set your area code
After setting your country code, you need to set
the correct area code for returning local,
national, or international calls received on the
Landline. This function is not for all countries,
please refer to glossary for area code
functionality, see page 40.
Enter the area code. Use
1
typing errors.
OK
Press to confirm.
2
• Your phone needs to reset and update the
information. It will power up automatically
after a few seconds.
Note
If you need to re-configure your area code
setting, see "Area code management", page 28.

3.5 Standby mode

Your phone is in standby mode when it is idle.
The standby screen displays your Skype status
icon, your Skype ID (if available), the handset
Clear
to correct
11