Philips VoIP841 User Manual page 36

administrative settings from the web page. You
shall not need to configure most of these settings
after setting up the phone. This section is
recommended for advanced users only.
! Warning
Incorrect network settings will affect Skype usage
on this phone. We recommend that you consult
your network administrator or service provider
before making any changes to the network
settings.
8.9.1 Access the Web page
Minimum system requirement:
• VOIP841 set
• Computer with a web browser
• Router
• Internet connection
Make sure your phone is properly connected and
set up sharing the same network with your
computer as shown below.
Open a Web browser.
1
Enter your phone's IP address at the address
2
bar.
• An authentication window pops out.
Tip
To find your phone's IP address, see "View your
network setting", page 33.
Enter the user name and password.
3
The default user name is philips and
the default password is voip841.
34
After verifying your user name and password, you
will see the configuration home page (see next
page).
The home page
The home page shows your current system and
network settings.
The network page
The network page shows your current internet
connection type and Ethernet speed. You can
make changes to these settings on this page.
The Skype page
The Skype page shows your current Skype status.
You can create a new Skype account or sign in to
Skype from this page.
The system page
You can upgrade your phone's operating system
from this page. You will first need to download
the latest software image from the Philips
Consumer Electronics web page, philips.com.
! Warning
System upgrade must not be interrupted. During
system upgrade, make sure your base unit is
powered on at all times. Interrupting the upgrade
process will cause your phone to become non-
functional. Contact your Service Center if your
phone has become non-functional.
The administration page
You can change the web page access password on
this page. You can also reset your phone to
factory default feature and network settings.
Settings