Download  Print this page

Callerid First Ring Suppression; Lock Keypad; Paging - Philips VOIP321 User Manual

Philips user manual telephone voip321.
Hide thumbs


Lock keypad

Keypad can be locked to prevent accidental key press.
When the keypad is locked, you can still answer an incoming call by pressing
During the call, the keypad is active. When the call is ended, the keypad will be locked again.
In idle mode, long press
Long press
again to unlock the keypad.


You can locate the handsets by using this feature.
on the base.
All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays
To stop paging :
on one of the handsets or press
Note : If an external call comes in, all the handsets will stop paging, and play the external call melody.
A handset will not play the paging melody if it is powered off or not in idle mode. However, all the other
handsets will still ring.

CallerID first ring suppression

If you have subscribed for CallerID service, your phone will suppress the first ring before the CID. After
resetting, first ring suppression will be deactivated. After the first call, your phone will automatically detect if
CID service is subscribed. If CID service is detected, your phone will start suppressing the first ring after the
first call.
Note : Once first ring suppression is activated, the first ring before CID will be suppressed even after
you have unsubscribed the CID service. If you have unsubscribed the CID service and do not wish to
have the first ring suppressed, please power recycle the base.
Switch on/off the handset
To switch off the your phone, long press
To switch on the power of your phone, press
The handset should be automatically turned on.
Other features
. When locked, LOCKED appears on the display.
on the base again.
while in idle mode.
or return the handset to the charger.



Table of Contents

   Also See for Philips VOIP321

   Related Manuals for Philips VOIP321

This manual is also suitable for:

Voip3212s/05bVoip3212s/05Voip 321

Comments to this Manuals

Symbols: 0
Latest comments: