Table of Contents
Advertisement
2.
Select the (
to record.
3.
Select one-hour blocks to add to the recording setup.
4.
When you have the schedule set up as you want it, select Apply. The
configuration for that channel is now saved.
5.
If you want to use that same configuration on another channel, select that
channel in the dropdown box for Apply Settings To. Then, select Copy.
The configuration is now copied to the second desired channel.
6.
If you want to apply the settings from one channel to ALL channels,
select All in the dropdown box for Apply Settings To. Then, select Copy.
The configuration is now copied to all channels.
7.
Select Apply to save the settings.
8.
Select Exit.
Video Signal Loss Icon
If you lose video from a camera (someone cuts the cable), the system alerts
you according to the presets from this screen.
Select Trigger for the camera you want to set. The Trigger screen for that
channel displays.
) icon to set 1-hour blocks when you WANT that channel
35
Advertisement
Table of Contents
