Hyundai ELANTRA 2006 Owner's Manual page 43

If you need to tighten the belt, pull
more webbing toward the retractor.
When you unbuckle the seat belt and
allow it to retract, the retractor will
automatically revert back to its normal
seated passenger emergency locking
usage condition.
NOTE:
o Before installing the child re-
straint system, read the instruc-
tions supplied by the child re-
straint system manufacturer.
o If the seat belt does not operate
as described, have the system
checked immediately by your
authorized Hyundai dealer.
!
WARNING:
Do not install any child restraint
system in the front passenger seat.
Should an accident occur and cause
the passenger's side airbag to de-
ploy, it could severely injure or kill
an infant or child seated in an infant
or child seat. Therefore, only use a
child restraint system in the rear
seat of your vehicle.
B230B02A-GAT
Using a Child Restraint System
with "Tether Anchorage" Sys-
tem
Bolt, Holder
(5/16"-22 mm)
Washer, Conical Spring
Holder,
Child Restraint Hook
Retainer Washer
HSM386
For small children and babies, the use
of a child seat or infant seat is required.
This child seat or infant seat should be
of appropriate size for the child and
should be installed in accordance with
the manufacturer's instructions. It is
further recommanded that the seat be
placed in the vehicle's rear seat since
this can make an important contribu-
tion to safety. Your vehicle is provided
three child restraint hook holders for
installing the child seat or infant seat.
FEATURES OF YOUR HYUNDAI
B230C03A-GAT
Securing a Child Restraint Sys-
tem with "Tether Anchorage"
System(4 Door)
Three child restraint hook holders are
located on the rear seat package tray.
Child Restraint
Hook Holder
Tether anchor
cover
G230C02E
1. Open the tether anchor cover on the
rear seat package tray.
1
29