Hyundai ELANTRA 2006 Owner's Manual page 26

1
FEATURES OF YOUR HYUNDAI
12
B070F01A-GAT
Keyless Entry System
(If installed)
Locking doors
1. Close all doors.
2. Push the "LOCK" button on the trans-
mitter.
3. At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Unlocking doors
1. Push the "UNLOCK" button on the
transmitter.
2. At the same time all doors unlock,
the turn signal light will blink twice to
indicate that the system is disarmed.
B070E02HP-GAT
Replacing the battery
When the transmitter's battery becomes
weak, it may take several pushes on
the button to lock or unlock the doors,
and the LED will not light. Replace the
battery as soon as possible.
Battery type : CR2032
Replacement instructions:
Screwdriver
MSO-0048-1
1. Carefully seperate the case with a
blade screwdriver as shown in the
illustration.
Case
Battery
MSO-0048-2
2. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same(+side facing down), then
insert it in the transmitter.