Hyundai ELANTRA 2006 Owner's Manual page 163

2
DRIVING YOUR HYUNDAI
10
C090P01A-GAT
Overdrive Switch (1.6 DOHC)
C090P01E
When the overdrive switch is turned
on, the transaxle will automatically
upshift to the second, third and over-
drive gears. When the overdrive switch
is turned off, the transaxle will not
upshift to the overdrive gear. For nor-
mal driving, the selector lever should
be left in the "D" position and the
overdrive switch turned on.
If you need to accelerate rapidly, press
the accelerator pedal all the way to the
floor. The transaxle will automatically
shift to a lower gear, depending on the
vehicle speed and load.
C090Q01E-GAT
(1.8 / 2.0 DOHC)
C090A02E-1
The highly efficient Hyundai automatic
transaxle has four forward speeds and
one reverse speed. It has a conven-
tional shift pattern as shown in the
illustration. At night, with the multi-
function switch turned on to the park-
ing light or headlight position, the ap-
propriate symbol on the shift pattern
indicator will be illuminated according
to the range selected.
!
CAUTION:
Never shift into "R" or "P" position
while the vehicle is moving.
HXD007
NOTE:
Depress the brake pedal and
push the button when shifting.
Push the button when shifting.
The selector lever can be shifted
freely.
The first few shifts on a new vehicle, or
if the battery has been disconnected
and reinstalled, may be somewhat
abrupt. This is a normal condition, and
the shifting sequence will adjust after