Table of Contents
Advertisement
With the two latches open, use them as pullers to separate the movable part from the fixed part attached to the pallet.
•
Notice. When you open the runner system to the limit, you notice a ledge that locks the moving part, as the ledge passes,
•
the
slides are released and the equipment may fall. You have to be careful that this does not occur. The movable part of the fixed
part is then separated.
The surfaces on which the parts are supported must be protected.
•
•
With the help of a star wrench PZ2 remove the two screws securing the fixed part to the pallet, the equipment is thus
completely unpacked.
•
Figure 2 – Separate moving and fixed parts
Figure 3 – Separate parts
4
Advertisement
Table of Contents
