Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson ET-5180 User Manual

• To change the case of letters, select
• To delete the previous character, select
• To enter numbers and symbols, select 123#.
• To enter a space, select
• To finish entering your network name or password, select OK.
8. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
Note: Make a note of the SSID and password that appear.
9. Press the
Computers and wireless devices can now access the product using the new network name and
password.
Parent topic:

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the
2. Select the
.
home button to return to the Home screen.
Wi-Fi Direct Mode Setup
Wi-Fi or Wired Networking
home button, if necessary.
icon.
.
.
55