Product Status Messages - Epson ET-5180 User Manual

• OS X: You can manually update the software by opening the Applications > Epson Software folder
and selecting EPSON Software Updater.
• macOS 10.12.x, 10.13.x, 10.14.x, 10.15.x, or 11.x: You can manually update the software by opening
the App Store, selecting Updates, searching for a software update option for Epson Software, and
selecting Update.
Parent topic:

Product Status Messages

You can often diagnose problems with your product by checking the messages on its LCD screen.
LCD screen message
Printer error. Turn on the
printer again. See your
documentation for details.
Paper out in XX.
Paper Setup Auto Display
is set to Off. Some
features may not be
available. For details, see
your documentation.
No dial tone is detected.
The combination of IP
address and the subnet
mask is invalid. See your
documentation for more
details.
To use cloud services,
update the root certificate
from the Epson Web
Config utility.
Solving Problems
Condition/solution
A printer error has occurred. Turn the product off and then back on again. If
the error continues, check for a paper jam. If there is no paper jam, contact
Epson for support.
Load paper in the cassette or rear paper feed slot.
The Paper Setup Auto Display option is disabled. You must enable
Paper Setup Auto Display to use AirPrint.
Make sure the phone cable is connected correctly and the phone line
works. If you connected the product to a PBX (Private Branch Exchange)
phone line or Terminal Adapter, change the Line Type setting to PBX. If
you still cannot send a fax, turn off the Dial Tone Detection setting.
(Turning off the Dial Tone Detection setting may cause the product to drop
the first digit of a fax number.)
There is a problem with the network connection to your product. Check the
solutions in this guide.
Access your product's built-in Web Config utility and update the root
certificate for your product.
306